This unit can meet the full-load power generation requirements of low-concentration biogas (CH4 ≥ 30%), with feature of high efficiency, low energy consumption, easy maintenance, and high reliability, meeting the needs of customers.

√: Standard

○: Option

x: Unavailable

Remark:

All rated data are based on the operation under ISO 8528-1, 1SO 3046, DIN6271 conditions, using typical fan sizes and transmission ratios.

The performance tolerance referenced by Holly is ±5%.

The prime power = the power under the available load to replace the main power grid. 10% overload is allowed for one hour of operation every 12 hours.

Standby power = The power available under variable load in the event of a failure in the main power grid, with a maximum of 500 hours per year. Overload is not allowed.

Rated power factor: 0.8

* Suggested gas filtration standards：

1. Hydrogen sulfide (H₂S) < 200mg/Nm³.

2. The content of impurity particles is less than 30mg/Nm³.

3. The diameter of impurity particles is less than 5μm.

4. The water content in the gas is less than 20g/Nm³.

5. Gas temperature < 40℃.

Note: If the gas filtration meets the above conditions, it can effectively extend the service life of the generator set.